54 34 Power Convertible Top
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - POWER CONVERTIBLE TOP
| Type | Thread | Work instruction | Value | ||
|---|---|---|---|---|---|
| 1AZ | Rear window module to main bearing | F12 | 19 ±2.5 Nm | ||
| 2AZ | Rear window cover and hydraulic unit | F12 | 4.6 ±0.5 Nm | ||
| 3AZ | Rear window to power window regulator | F12 | 6.5 Nm | ||
| 4AZ | Rear window module holder | F12 | 19 ±2.5 Nm | ||
| 5AZ | Power window regulator guide rail | F12 | 8 Nm | ||
| 6AZ | Side cover to rear window module | F12 | 2.3 ±0.3 Nm | ||
| 7AZ | Linkage cover | F12 | 4 Nm | ||
| 8AZ | Seal for rear window | F12 | 2.8 Nm | ||
| 9AZ | Base plate, convertible top, to cowl panel | F12 | 8 Nm | ||
| 10AZ | Main bearing, convertible top | F12 | Z - direction | 20.5 Nm | |
| 11AZ | Main bearing, convertible top | F12 | X - direction | 8.6 Nm | |
| 12AZ | Terminal strip for gasket | F12 | 4 Nm | ||
| 13AZ | Gasket to soft top cover fin | F12 | 1.5 Nm | ||
| 14AZ | Roof liner to roof tip | F12 | 1.5 Nm | ||
| 15AZ | Clamping profile, headlining, to bow | F12 | 1.9 Nm | ||
| 16AZ | Soft top cover to soft top frame | F12 | 2.8 Nm | ||
| 17AZ | Tension cable to soft top frame | F12 | 2.3 Nm | ||
| 18AZ | Tension cable to soft top frame main pillar | F12 | 2.8 Nm | ||
| 19AZ | Cable holder to soft top frame | F12 | 2.8 Nm | ||
| 20AZ | Control cable holder, long, to soft top frame | F12 | 2.8 Nm | ||
| 21AZ | Control cable, long, to soft top frame | F12 | 2.8 Nm | ||
| 22AZ | Rubber band to soft top frame | F12 | 2.8 Nm | ||
| 23AZ | Guide lugs for control cable holder and control cable, long, to soft top frame | F12 | 2.8 Nm | ||
| 24AZ | Control cable holder, short, to soft top frame | F12 | 2.8 Nm | ||
| 25AZ | Control cable, short, to soft top frame | F12 | 2.8 Nm | ||
| 26AZ | Control cable, long, to bow | F12 | 1.9 Nm | ||
| 27AZ | Tensioning strap to soft top frame | F12 | 2.8 Nm | ||
| 28AZ | Mechanical assembly module (locking unit) | F12 | 19 Nm | ||
| 29AZ | Roof frame rail gasket to soft top frame | F12 | 4 Nm | ||