51 17 Flaps
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FLAPS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Hinge to water channel | E64/F12 | Combination oval-head machine screw | 21 Nm | |
| 2AZ | Hinge to water channel | E64/F12 | Hexagon nut and washer assembly, microencapsulated | 21 Nm | |
| 3AZ | Hinge to convertible top compartment lid | E64 | Multi-purpose bolt | 8.8 Nm | |
| 4AZ | Hinge to convertible top compartment lid | E64/F12 | Multi-purpose bolt (ISA), self-locking | 8 Nm | |
| 5AZ | Striker on soft top | E64 | 8.8 Nm | ||
| F12 | 8 Nm | ||||
| 6AZ | Kinematics box to body | E64 | 8 Nm | ||
| 7AZ | Bracket for drive cylinder | E64/F12 | 8 Nm | ||
| 8AZ | Stop buffer, convertible-top compartment lid | E64 | 8 Nm | ||
| 9AZ | Soft top compartment lid cover | E64 | Combination hexagon nut | 4.6 Nm | |
| 10AZ | Soft top compartment lid cover | E64/F12 | Hexagon nut | 4.6 Nm | |
| 11AZ | Protective cover on sidewall | E85/E86 | 3 Nm | ||
| 12AZ | Trim strip on soft top compartment lid cover | F12 | 3 Nm | ||