34 11 Front Brake
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT BRAKE
| Type | Thread | Tightening specifications | Value | ||
|---|---|---|---|---|---|
| 1AZ | Brake disc to wheel hub | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M8 | Replace screws. | 16 Nm |
| 2AZ | Brake anchor plate to swivel bearing | F01, F02, F04, F06, F07, F10, F11, F12, F13, F18 | M12x1.5 | 110 Nm | |
| F03 | M14x1.5 | Replace screws.
IMPORTANT:
Observe 4 phase tightening!
|
|||
| Jointing torque | 150 Nm | ||||
| Release | min.90 ° | ||||
| Jointing torque | 150 Nm | ||||
| Angle of rotation | 180°± 15° | ||||
| F25/F26 | M12x1.5 | Replace screws. | |||
| Jointing torque | 75 Nm | ||||
| Angle of rotation | 45°10° | ||||
| 3AZ | Guard plate to swivel bearing | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M6 | Replace screws. | 12 Nm |
| 4AZ | Guide bolt (brake caliper to brake anchor plate) | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | SW9 | 55 Nm | |
| F07/F06/F10/F11/F12/F13/F18/F25/F26 | SW7 | 30-5 Nm | |||
| F25/F26 | SW8 | 28 Nm | |||
| 5AZ | Brake caliper at swivel bearing | F06/F10/F12/F13/M models only | M12x1.5 | Hexagon nut | 95 Nm |
| 6AZ | Stud bolt (for brake caliper) in wheel carrier | F06/F10/F12/F13, M models only | Clean the thread in the wheel carrier and renew the stud bolt | 20 Nm | |