31 11 040 Removing and installing/replacing stiffening plate (M6)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
Driving without stiffening plate is not permissible!
Driving without stiffening plate is not permissible!
Necessary preliminary work:
- Remove front UNDERBODY PROTECTION .
Release screws (1).
Tightening torque 31 10 2AZ .
Remove thrust panel (reinforcement plate) (2).
Installation note:
Replace screws (1).