84 11 620 Removing and installing transmit-receive unit

WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove luggage compartment floor trim panel, refer to 51 47 101 REMOVING AND INSTALLING/REPLACING LUGGAGE COMPARTMENT FLOOR TRIM PANEL .

Remove flap in luggage compartment trim panel on left, refer to 51 47 172 REMOVING AND INSTALLING/REPLACING FLAP IN LUGGAGE COMPARTMENT TRIM, LEFT OR RIGHT .

Unscrew nuts (1).

Remove support for side member at rear left (2).

Fig 1: Removing Side Member Support (Rear Left)

Courtesy of BMW OF NORTH AMERICA, INC.

Release cap nuts (1).

Remove retaining bracket (2) and transmit-receive unit (3) in direction of arrow.

Fig 2: Removing Transmit-Receive Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (4).

Installation:

Replace cap nuts (1).