84 11 510 Removing and installing/replacing eject box (V Series cellular telephone)

If necessary, remove telephone from eject box.

Remove center console, refer to 51 16 200 REMOVING AND INSTALLING CENTER CONSOLE .

Unclip plug connections (1).

Fig 1: Removing Telephone From Eject Box

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (2) and remove bracket (3).

Release cable straps and remove wiring harness (4) from guides.

Installation: 

Ensure correct cable routing.

Loosen screws (1).

Remove armrest (2).

Fig 2: Removing Armrest

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws (1).

Feed out cover (2) on lock and lift off.

Fig 3: Removing Telephone Interface Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Drive out pins (1) in direction of arrow.

Fig 4: Removing Telephone Interface Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Lever out covers (2) and feed out wiring harness (3).

Remove interface for telephone (4).

Fig 5: Removing Telephone Interface

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Ensure correct cable routing.

Move function carrier in direction of arrow as far as it will go. Unlock retaining hook.

Fig 6: Removing Function Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Remove connecting cable for telephone from guides. Move eject box (1) in direction of arrow and remove.

Fig 7: Removing Eject Box & Telephone Connecting Cable

Courtesy of BMW OF NORTH AMERICA, INC.