24 40 Torque converter
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TORQUE CONVERTER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Torque converter to flywheel | GA6HP19Z/GA6HP26Z/GA6HP32Z/GA8HP45Z/GA8HP50Z/GA8HP70Z GA8HP75Z |
M10 10.9 | Replace converter screws. (Remove adhesive residue from thread, if applicable) |
56 Nm |
| GA6HP26Z/GA8HP75Z/GA8HP90Z/(AWD) | M10 10.9 | Replace converter screws. (Remove adhesive residue from thread, if applicable) |
60 Nm | ||
| F30/F31/F32/F33/F35 N20 GA8HP45Z | M10 10.9 | Replace converter screws. (Remove adhesive residue from thread, if applicable) |
60 Nm | ||
| 2AZ | Electrical machine to flywheel | GA8P70H | M10 | Replace hexagon nuts. (Remove adhesive residue from thread, if applicable) |
56 Nm |