24 30 Hydraulic/electric control parts and controlling elements
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HYDRAULIC/ELECTRIC CONTROL PARTS AND CONTROLLING ELEMENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Valve body to transmission | GA6HP19TU/GA6HP26TU | M6 | 8 Nm | |
| 2AZ | Valve housing to valve body | GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 5 Nm | |
| 3AZ | Input- and output-speed sensors to mechatronics | M6 | 12 Nm | ||
| 4AZ | Mechatronics to transmission | GA8HP45Z/GA8HP50Z/GA8HP70Z/GA8HP75Z/GA8HP90Z/GA8P70H | M6x59, M6x20 | Replace screws | 8 Nm |
| 5AZ | Oil volume accumulator to transmission | GA8HP45Z/GA8HP50Z/GA8HP70Z/GA8HP75Z | M6x59, M6x20 | Replace screws | 8 Nm |
| 6AZ | Centring plate to transmission bell housing | GA8HP45Z/GA8HP50Z/GA8HP70Z/GA8HP75Z/GA8HP90Z | M8X74 | Jointing torque | 10 Nm |
| Angle of rotation | 90 ° | ||||
| 7AZ | Speed sensor to transmission | GA8HP50Z/GA8HP75Z | M6X20 | Replace screws | |
| Jointing torque | 4 Nm | ||||
| Angle of rotation | 12 ° | ||||