21 52 Clutch operation (hydraulic)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CLUTCH OPERATION (HYDRAULIC)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Clutch slave cylinder to clutch housing/transmission housing | F06/F10/F11/F12/F13/F18/F20 N47/F25/F26/F30/F31/F34 N47/F80/F82/F83 | Replace nuts | 22 Nm | |
| F20/F21/F22/F23/F30/F31/F32/F33/F34/F35-N13/N20/F10-N20/F36 | Replace screws | 19 Nm | |||
| 2AZ | Clutch master cylinder on bearing support | F20/F21/F22/F23/F30/F31/F32/F34/F35/F36/F80/F82/F83 | 22 Nm | ||