67 61 515 Replacing drive with gear (front) for actuating slide/tilt sunroof (panorama glass sunroof)
WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove bracket from roofliner at front, refer to 51 44 020 REMOVING AND INSTALLING/REPLACING BRACKET ROOFLINER FRONT .
NOTE:
Secure drive with gear for actuating slide/tilt sunroof (2) against falling out.
Release screws (1). Tightening torque, refer to 54 13 1AZ in SLIDE/TILT ROOF AND CONVERTIBLE TOP - TIGHTENING TORQUES - X5 .
Lower drive with gear for actuating slide/tilt sunroof (2).
NOTE:
Screws (1) are micro-encapsulated.
Unlock plug connection (3), disconnect and remove drive with gear for actuating slide/tilt sunroof (2).
Installation:
Insert gear wheel (1) of drive with gear for actuating slide/tilt sunroof (2) exactly in gear teeth (3).
Installation:
Initialize slide/tilt sunroof, refer to SUNROOF .