13 54 015 Removing and installing/sealing left throttle body (S63 B44 T 0)

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove left CHARGE AIR COOLER

Release screws (1).

Tightening torque 13 54 1AZ .

Remove throttle body (2) from charge air cooler.

Installation note:

Check plug connection for coolant residues. If necessary, blow clean plug connection with compressed air.

Fig 1: Identifying Charge Air Cooler Throttle Body And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace sealing ring (1) of throttle body (2).

Fig 2: Identifying Throttle Assembly Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Check stored fault message.

Delete fault memory.