13 62 Sensors for control unit
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SENSORS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Temperature sensor, coolant/oil | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M12x1.5 | 13.5 Nm | |
| 2AZ | Pressure sensor to intake manifold | N63 B44 O 0 | K50x14 | 3.5 Nm | |
| N63 B40 O 1/N63 B44 O 1 | 4 Nm | ||||
| 3AZ | Camshaft sensor to cylinder head | N63 B44 O 0 | M6 | 9 Nm | |
| N63 B44 O 0 | K50 | 5 Nm | |||
| N63 B40 O 1/N63 B44 O 1 | 8 Nm | ||||
| 4AZ | Crankshaft sensor to transmission | N63 B44 O 0 | M6 | 9 Nm | |
| N63 B40 O 1/N63 B44 O1 | M6 | 8 Nm | |||
| 5AZ | Knock sensor to crankcase | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M8 | 21.5 Nm | |
| 6AZ | Hot film air mass meter to upper section of intake filter housing | N63 B44 O 0 | K50x16 | 3 Nm | |
| N63 B40 O 1/N63 B44 O 1 | 4 Nm | ||||
| 7AZ | Pressure sensor to intercooler | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | 3.2 Nm | |
| 8AZ | Intake filter housing upper section to intake filter housing lower section | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | PT50x26/12 | 3.3 Nm | |
| 9AZ | Clamp to air duct | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | 3 Nm | ||