13 51 Injection pump, control
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - INJECTION PUMP, CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | High-pressure pump to cylinder head cover | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M6 | Replace screws. Tighten bolts to final torque/angle in uniform increments of 90°. Follow repair instruction! See 13 51 065 REMOVING AND INSTALLING/REPLACING LEFT HIGH PRESSURE PUMP (N63) or 13 51 070 REMOVING AND INSTALLING/REPLACING RIGHT HIGH PRESSURE PUMP (N63) |
12 Nm |