11 36 Variable Camshaft Control
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | VANOS with sensor wheel to inlet and exhaust camshafts | N55 | M10x94 | Replace screw | |
| Jointing torque | 20 Nm | ||||
| Torque angle | 180 ° | ||||
| 2AZ | Non-return valve VANOS to cylinder head | N55 | M14 x 1.5 | 13 Nm | |
| 3AZ | Solenoid valve holder to cylinder head | N55 | M6x12 | 9 Nm | |