11 41 Oil pump with strainer and motor
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OIL PUMP WITH STRAINER AND MOTOR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Intake pipe with oil deflector to crankcase lower section (bedplate) | N55 | M6x30 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Oil pump to bedplate | N55 | M8x123 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 180 ° | ||||
| N55 | M8x31 M8x37 |
Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
|||
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 3AZ | Chain module to crankcase and oil pump | N55 | M6x16 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 4AZ | Hydraulic valve of oil pump to crankcase | N55 | M6x16 | Jointing torque | 4 Nm |
| Angle of rotation | 45 ° | ||||
| 5AZ | Sprocket to oil pump | N55 | M8 | Jointing torque | 20 Nm |
| Angle of rotation | 45 ° | ||||
| 6AZ | Triangular drive to oil pump | N55 | M6x16 | Jointing torque | 4 Nm |
| Angle of rotation | 45 ° | ||||
| 7AZ | Chain tensioner to crankcase | N55 | M6x16 | 10 Nm | |