11 21 Crankshaft and Bearings

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION - CRANKSHAFT AND BEARINGS

		Type	Thread	Tightening specification	Measure
1AZ	Torsion damper (hub) to crankshaft (central bolt 12.9)	N55	M18x108	Replace screw Lightly oil screw and thread
				Jointing torque	100 Nm
				Torque angle	270 °