11 12 Cylinder Head And Cylinder Head Cover
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CYLINDER HEAD AND CYLINDER HEAD COVER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Cylinder head bolt | N55 | M11 x 173 | Replace screws. | |
| Jointing torque | 30 Nm | ||||
| 1. Angle of rotation | 90 ° | ||||
| 2. Angle of rotation | 180 ° | ||||
| 2AZ | Cylinder head bolt | N55 | M9 x 170 | Replace screws. | |
| Jointing torque | 30 Nm | ||||
| 1. Angle of rotation | 90 ° | ||||
| 2. Angle of rotation | 180 ° | ||||
| 3AZ | Cylinder head bolt | N55 | M9 x 30 M9 x 70 |
22 Nm | |
| 4AZ | Cylinder head cover to cylinder head. | N55 | M6 | 8.5 Nm | |
| 5AZ | Towing lug to cylinder head | N55 | 30 Nm | ||
| 6AZ | Ignition coil cover to cylinder head cover. | N55 | M6 x 30 | 4 Nm | |
| 7AZ | Metal bracket for ignition coil cover to cylinder head cover. | N55 | M6 x 16 | 8 Nm | |
| 8AZ | Ignition coils and injector slot to cylinder head | N55 | M6 x 30 | 8.5 Nm | |
| 9AZ | EMC plate to ignition coils and injector slot (EMC = electromagnetic compatibility) | N55 | M6 x 20 | 8.0 Nm | |
| 10AZ | EMC plate to ignition coils and injector slot (EMC = electromagnetic compatibility) | N55 | M6 x 18.5 | Earth connection | 8.5 Nm |
| 11AZ | Screw plug in oil chamber | N55 | M16 x 1.5 | Replace screw with sealing ring | 27 Nm |