11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Connecting rod bolts (Connecting rod screwed at an angle) | N63 O0 | M9 | Replace, wash and oil screws | |
| 1. Jointing torque | 5 Nm | ||||
| 2. Jointing torque | 20 Nm | ||||
| 3. Angle of rotation | 70 ° | ||||
| 2AZ | Connecting rod bolts (Connecting rod screwed straight) (New connecting rod with new connecting rod bolts) | N63 O0 | M9x1.25 | Release screws. Suction off crack surfaces. |
|
| 1. Jointing torque | 5 Nm | ||||
| 2. Jointing torque | 20 Nm | ||||
| 3. Jointing torque | 30 Nm | ||||
| 3. Angle of rotation | 75 ° | ||||
| 3AZ | (Connecting rod screwed straight)
|
N63 O0 | M9x1.25 | ||
| 1. Jointing torque | 5 Nm | ||||
| 2. Jointing torque | 20 Nm | ||||
| 3. Jointing torque | 30 Nm | ||||
| 4. Angle of rotation | 75 ° | ||||
| 2. Loosen screws | 5. Loosen screw. | 180 ° | |||
| 6. Jointing torque | 5 Nm | ||||
| 7. Jointing torque | 20 Nm | ||||
| 8. Jointing torque | 30 Nm | ||||
| 9. Angle of rotation | 75 ° | ||||
| 3. Loosen screws | 10. Loosen screw. | 180 ° | |||
| 11. Jointing torque | 5 Nm | ||||
| 12. Jointing torque | 20 Nm | ||||
| 13. Jointing torque | 30 Nm | ||||
| 14. Angle of rotation | 75 ° | ||||
| 4. Loosen screws | 15. Loosen screw. | 180 ° | |||
| 16. Jointing torque | 5 Nm | ||||
| 17. Jointing torque | 20 Nm | ||||
| 18. Jointing torque | 30 Nm | ||||
| 19. Angle of rotation | 75 ° | ||||