11 14 Case Covers
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CASE COVERS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Jump guard to crankcase | N63 | M6 | 10 Nm | |
| 2AZ | Gear case cover to crankcase, bottom | N63 | M8 | 21 Nm | |
| 3AZ | Gear case cover to cylinder head, top | N63 | M6 | 10 Nm | |
| 4AZ | End cover (oil) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |
| 5AZ | End cover (water) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |