LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3720 (Brakes - Repair - F12) >> Brake Testing And Bleeding >> 34 00 010 Checking Thickness Of Brake Pad

34 00 010 Checking Thickness Of Brake Pad

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE: The thickness of the outer brake pads can be determined without removing the wheels.
If necessary, move vehicle until opening for brake pad wear indicator (brake pad) can be seen through rim styling.

Insert special tool 34 1 260 wheel rim into opening for brake pad wear indicator.

Press special tool onto brake pad. Slide ring (1) in direction of arrow up to stop and read off measured value.

NOTE:
  1. Brake disc
  2. Brake pad with backplate

REMAINING BRAKE PAD THICKNESS OF FRONT BRAKE .
REMAINING BRAKE PAD THICKNESS OF REAR BRAKE .
Fig 1: Inserting Special Tool 34 1 260 Into Opening For Brake Pad Wear Indicator
G04726560Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals