32 41 100 Removing and installing/replacing belt pulley on vane pump for power steering
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Carry out preliminary work as described in the document " Replacing drive belt". See 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63)
or 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N55)
.
Slacken screws (1)
Relieve tension on drive belt . See 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63) , 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N55) or 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (S63T 0) and remove from belt pulley (2).
Unscrew bolts (1) and remove belt pulley (2).
Installation note:
Lettering on belt pulley (2) must point forwards.
Replace microencapsulated screws.
Tightening torque 32 41 4AZ .