65 52 013 Removing and installing complete on-board monitor (widescreen)

WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Unclip frame of on-board monitor (1) in direction of arrow and remove.

Fig 1: Unclipping On-Board Monitor Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws (1).

Pull out complete on-board monitor (2) in direction of arrow.

Fig 2: Removing Complete On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and (2) and disconnect.

Remove complete on-board monitor.

Fig 3: Disconnecting Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.