0491549 232050 Puller AM

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball bearing puller 6205) AM 232050 0491549 For pulling out the grooved ball bearing from the transmission countershaft and the transmission output shaft

Consisting of:

0491550 Claw
NOTE: (Claw for Rillex 6305 (8 pieces))
0491551 Holding sleeve
NOTE: (Union sleeve)
0491552 Spindle
NOTE: (Pressure spindle)

Fig 1: Identifying Puller (0491549)
Courtesy of BMW OF NORTH AMERICA, INC.