64 11 932 Replacing evaporator temperature sensor (A/C control)

WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove right glovebox, refer to 51 16 360 REMOVING AND INSTALLING RIGHT GLOVEBOX .

E39, E53:

Unclip air duct for right footwell (1) and pull out in direction of arrow.

Fig 1: Removing Left Footwell Air Duct

Courtesy of BMW OF NORTH AMERICA, INC.

Break out repair cover (1) with pointed pliers in direction of arrow.

Fig 2: Removing Repair Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect connector (2).

Unlock plug of faulty evaporator temperature sensor (1) and pull out in direction of arrow.

Fig 3: Removing Evaporator Temperature Sensor (A/C Control)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Secure plug of faulty evaporator temperature sensor with fabric adhesive tape.

Insert new evaporator temperature sensor in opening (2) and lock into place.

Installation:

Make sure evaporator temperature sensor (1) and cable (2) are correctly seated.

Fig 4: Installing Evaporator Temperature Sensor (A/C Control)

Courtesy of BMW OF NORTH AMERICA, INC.