64 11 805 Replacing servodrive of fresh air/recirculated air flap (automatic A/C)

WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove trim for pedal assembly, refer to 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .

Unclip air duct for footwell on left (2) at mounts (1) and remove in direction of arrow.

Fig 1: Removing Left Footwell Air Duct

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip lock (2) and pull out servodrive (3) in direction of arrow. Disconnect plug connection (1).

Fig 2: Removing Servodrive

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, align shaft of fresh air/recirculated air flap to position of servodrive.

Fig 3: Identifying Installed Position Of Servodrive

Courtesy of BMW OF NORTH AMERICA, INC.