64 11 748 Removing and installing heater controls (A/C control): Procedure

WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Unlock heating controls (1) with special tool 64 1 010 and pull out in direction of arrow.

Unfasten plug connection.

Fig 1: Removing Heating Controls

Courtesy of BMW OF NORTH AMERICA, INC.

Remove Bowden cables (1).

Installation:

Observe color coding of Bowden cables.

Fig 2: Installing Bowden Cables

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Unclip Bowden cable holder (1) in direction of arrow.
Remove eye (2) from deflector (3).

Fig 3: Removing Bowden Cable Holder

Courtesy of BMW OF NORTH AMERICA, INC.