0490482 007500 Extractor AM

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (universal extractor Kukko 17/K) For pulling bearing inner race from drive flange on wheel bearing, rear

Consisting of:

0490483 Spindle
NOTE: (pressure spindle with bridge)
0490484 Spindle
NOTE: (adjusting spindle (2 x) with knurled nuts (4 x))
0490485 Spindle
NOTE: (pressure spindle, side)
0490486 Clip
NOTE: (adjusting jaw (2 x))
0490487 Screw
NOTE: (adjusting screws (1 x) with nut) For adjusting jaw (1 x)

Fig 1: Identifying Extractor (0490482)
Courtesy of BMW OF NORTH AMERICA, INC.
0490488 Extension
NOTE: (extension (2 x))
0490489 Bridge