LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3676 (Engine And Transmission Mounting - Repair) >> Transmission Suspension, Manual Transmission >> 22 31 055 Removing and installing/replacing transmission bearing block (N52) automatic

22 31 055 Removing and installing/replacing transmission bearing block (N52) automatic

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Replace RUBBER MOUNT  for transmission mounting

Remove transmission support block from transmission.

Installation note: 

Tightening torque 22 32 1AZ .

Fig 1: Identifying Transmission Support Block From Transmission Screws
G09876747Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals