22 32 055 Removing and installing/replacing transmission bearing block (N55 Hybrid)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Compliance with the following points is mandatory before beginning work:

Observe SAFETY INFORMATION for handling hybrid cars.

Necessary preliminary tasks:

REMOVE RUBBER MOUNTS FOR GEARBOX MOUNTING .

Release screw (1) and remove earth cable (2).

Release screws (3).

Tightening torque 22 32 1AZ .

Remove transmission mounting bracket from transmission.

Fig 1: Identifying Automatic Transmission Mounting Bracket, Screw And Earth Cable

Courtesy of BMW OF NORTH AMERICA, INC.