61 71 015 Removing and installing/replacing a jet nozzle in windshield washer system: Procedure

WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Unclip plug connection (1) and disconnect.

Detach angle (2) or T-piece from jet nozzle.

Fig 1: Removing T-Piece From Jet Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock jet nozzle (1) with a suitable screwdriver (2).

Lever out jet nozzle (1) with special tool 00 9 317 and remove.

Installation:

Ensure hose is laid without kinks.

Adjust jet nozzle.

Fig 2: Removing Jet Nozzle In Windshield Washer System

Courtesy of BMW OF NORTH AMERICA, INC.