51 45 184 Removing and installing (replacing) trim panel for pedal mechanism (US only)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.

IMPORTANT: Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.

Detach the BATTERY CABLE NEGATIVE TERMINAL .

Release screws (1).

Installation note:

Replace screws.

Tightening torque 51 45 4AZ .

Unscrew screw (3) and remove carpet trim (4) by pulling forward.

Unclip panel for pedal assembly (2) and lower slightly.

Disconnect plug connections behind.

Remove panel for pedal assembly (2)

Fig 1: Identifying Pedal Assembly Panel, Carpet Trim And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Remove FOOTWELL LIGHT
Remove the SPEAKER OF THE HANDS-FREE SYSTEM
Remove AIRBAG MODULE