54 13 050 Replacing seal for slide/tilt sunroof lid at rear
WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Open Glass Slide/Tilt Sunroof
NOTE:
Follow repair instructions for bonded seals on glass slide/tilt sunroof. Refer to 54 0 ... REPAIR INSTRUCTIONS FOR BONDED SEALS
.
Detach seal (1) from slide/tilt sunroof lid.
Installation:
Clean bonding surface with adhesive remover.
Press seal without stretching (squashing).
IMPORTANT:
Do not touch bonding surface. Surface temperature at least 20 °C. Incorrect bonding of the seal will result in leakage.