21 52 Clutch operation (hydraulic)
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2016 BMW M5, 2016 BMW 535i, 2015 BMW M5, 2015 BMW 535i, and 2014 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CLUTCH OPERATION (HYDRAULIC)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Clutch slave cylinder to clutch housing/transmission housing | F06/F10/F11/F12/F13/F18/F20 N47/F25/F26/F30/F31/F34 N47/F80/F82/F83 |
Replace nuts | 22 Nm | |
| F20/F21/F22/F23/F30/F31/F32/F33/F34/F35-N13/N20/F10-N20/F36 | Replace screws | 19 Nm | |||
| 2AZ | Clutch master cylinder on bearing support | F20/F21/F22/F23/F30/F31/F32/F34/F35/F36/F80/F82/F83 | 22 Nm | ||