12 31 Alternator with Drive and Mounting Parts
WARNING: This page is about a different car, the 2011 BMW 528i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ALTERNATOR WITH DRIVE AND MOUNTING PARTS
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ |
Alternator to crankcase |
N52T |
M8x82 |
Replace screws |
|
| Jointing torque |
10 Nm |
| Torque angle |
190 ° |