21 52 Clutch operation (hydraulic)
WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH OPERATION (HYDRAULIC) SPECIFICATION
| Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|
| 1AZ Coupling bolts for hydraulic pipes | All | 17 N.m | ||
| E46 | 20 + 5 N.m | |||
| 2AZ Clutch master cylinder to bearing block | All | 22 N.m | ||
| E83 | 8 N.m | |||
| 3AZ Fitting screw, clutch master cylinder | All | 22 N.m | ||
| 4AZ Clutch master cylinder to pedal assembly | All | 10 N.m | ||
| 5AZ Clutch slave cylinder to clutch housing/transmission case | All | 22 N.m | ||
| 6AZ Pressure accumulator to hydraulic unit | E36 / M3 | 35 N.m | ||
| 7AZ Coupling bolts for hydraulic pipes | E46 / M3 / E87 | 14 N.m | ||
| 8AZ Pressure accumulator for hydraulic unit | E46 / M3 | 40 N.m | ||
| 9AZ Clutch position sensor to clutch slave cylinder | E46 / E60 / E61 / E63 / E64 / E85 | 6-speed SMG | 2.5 N.m | |
| E60 / E63 | 7-speed SMG | 3.5 N.m |