51 14 000 Removing and installing/replacing front BMW badge

WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 318

Lever out badge with special tool 00 9 318 and remove towards top.

Fig 1: Levelling Out Badge With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of badge (1) must not be damaged or missing:

2 - Guide pins
3 - Grommets

Fig 2: Locating Guide Pins And Grommets

Courtesy of BMW OF NORTH AMERICA, INC.