22 32 055 Removing and installing/replacing gearbox bearing block (N55, N57)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
REMOVE RUBBER MOUNTS FOR GEARBOX MOUNTING .
Release screw (1) and remove earth cable (2).
Release screws (3).
Remove transmission mounting bracket from transmission.
Installation note:
Tightening torque 22 32 1AZ .