LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3573 (Body Equipment - Repair) >> Trim, Covers, Handle Trim >> 51 13 116 Removing and installing/replacing cowl panel cover >> 61 61 010 Checking contact angle of windscreen wiper arms on front windscreen >> 61 61... Checking contact angle of windscreen wiper on left or right

61 61... Checking contact angle of windscreen wiper on left or right

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Correctly adjusting the contact angle of the wiper arms is crucial to determining wiping quality. For adjustment, refer to the vehicle-specific service information. 

Fig 1: Identifying Contact Angle Between Wiper Blade Center Plane And Windscreen
G04727661Courtesy of BMW OF NORTH AMERICA, INC.

A/B = Distance between wiper blade (2) and trim panel on cowl panel (1)

NOTE: Measurement is taken at the height of the locators (3) for the windscreen wiper arms

C= Contact angle between wiper blade center plane and windscreen

When using special tool 61 6 100, check the scale value according to the following table.

For RHD vehicles, change the preceding sign of the scale values.

Model Contact angle (C) on windscreen wiper arm Scale value (LHD) on special tool Setting dimension (A, B) on windscreen wiper arm
Front passenger side Driver side Front passenger side Driver side Front passenger side Driver side  
F01/F02/F03 F04/ 85.0 ° +3.0°-3.0° 85.0 ° +3.0°- 3.0° -5 +3, 0-3, 0 -5 +3, 0-3, 0 60±3 mm 70 ±3 mm  
F07 85.0 ° +3.0°-3.0° 85.0 ° +3.0°- 3.0° -5 +3, 0-3, 0 -5 +3, 0-3, 0 67±3 mm 80±3 mm  
F10/F11/F18 85.0 ° +3.0°-3.0° 85.0 ° +3.0°- 3.0° -5 +3, 0-3, 0 -5 +3, 0-3, 0 60±3 mm 65 ±3 mm  
F06/F12/F13 85.0 ° +3.0°-3.0 85.0 ° +3.0°- 3.0 -5 +3, 0-3, 0 -5 +3, 0-3, 0 82±3 mm 88±3 mm