LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3573 (Body Equipment - Repair) >> MUCKET For Doors >> 51 72 010 Replacing edge protection for left or right rear door

51 72 010 Replacing edge protection for left or right rear door

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks: 

IMPORTANT: Follow NOTES  for fitting sealing!

Detach edge protection (1).

Installation note: 

Install edge protection (1) starting in area "A".

When installed, the location of joint of edge protection (1) must be in area "B".

Pull off mounting cord starting in area "B".

Fig 1: Edge Protection Joint Location
G06886028Courtesy of BMW OF NORTH AMERICA, INC.