13 71 030 Removing and installing/replacing both intake silencer housings (N63 B40/B44 O 0/1)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks :
- Switch off ignition.
- Remove ACOUSTIC COVER
NOTE:
Description for intake silencer housing. Procedure for the right side is identical.
Release clamps (1).
Tightening torque 13 62 9AZ .
Unfasten connector (2) on hot film air mass meter and disconnect.
Release clamp (3).
Unclip the oxygen sensor cable from the intake filter housing.
Detach intake air filter housing from intake port, pull off upwards and remove.