41 35 Side Panels
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 BMW 550i GT xDrive, 2016 BMW 535i GT xDrive, 2016 BMW 535i GT, 2015 BMW 550i GT xDrive, and 2015 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SIDE PANELS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Front side wall to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F25/F26 | M6x12 | 7.6 Nm | |
| 2AZ | Front side wall to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13 | Hexagon head tapping screw ST6.3x13 | 7.6 Nm | |
| Sheet metal nut ST 6.3 | 7.6 Nm | ||||
| 3AZ | Side deformation element holder (plastic) to wheel arch support | F15 | M6x48 | 8 Nm | |
| 4AZ | Top deformation element holder (plastic) to support | F15 | M6x16 | Replace screws | 8 Nm |
| 5AZ | Front side panel to bumper | F15 | M6x16 | Replace screws | 8 Nm |
| 6AZ | Side panel to top center deformation element holder (metal) | F15 | M6x20 | 8 Nm | |
| 7AZ | Side panel to holder, windscreen area | F15 | M6x16 | Replace screws | 8 Nm |
| 8AZ | Side wall to body Area, A-pillar | F15 | M6x16 | Replace screws | 8 Nm |
| 9AZ | Front side panel to body, sill area | F15 | Sheet metal screw ST4.8x19 | Replace screws | 2.5 Nm |
| 10AZ | Side panel to deformation element holder (plastic) | F15 | M6x20 | 8 Nm | |
| 11AZ | Side panel to deformation element holder (plastic) | F15 | M6x35 | 8 Nm | |