41 62 Rear lid
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 BMW 550i GT xDrive, 2016 BMW 535i GT xDrive, 2016 BMW 535i GT, 2015 BMW 550i GT xDrive, and 2015 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR LID
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Tailgate to tailgate hinge | F01/F02/F03/F04/F10/F12/F13/F06 | M8x19.5 8.8 | 18.5 Nm | |
| F11 | ISA M8x22 | 18.5 Nm | |||
| F07 | M8 countersunk screw | 18.5 Nm | |||
| F07 | M10 x 34 | 36 Nm | |||
| 2AZ | Tailgate hinge to body | F01/F02/F03/F04/F10/F12/F13/F06 | nut M8 | 18.5 Nm | |
| F07 | M8 x 20 | 18.5 Nm | |||
| F11 | ISA M8x22 | 27 Nm | |||
| F11 | ISA M6x12 | 10 Nm | |||
| 2AZ | Holder to hinge | F12 | M6x12 | 7.6 Nm | |
| 2AZ | Hinge holder to body | F12 | M8x16 | 18.5 Nm | |
| 3AZ | Hinge bolt | F01/F02/F03/F04/F10/F13/F06 | nut M8 | 18.5 Nm | |
| 4AZ | Tailgate lower section to hinge | F07 | M8 x 17 | 18.5 Nm | |
| 5AZ | Tailgate lower section hinge to tailgate | F07 | nut M8 | 18.5 Nm | |
| 6AZ | Limit position, tailgate to body | F07 | M6 x 21 | 6 Nm | |
| F07 | nutM6 | 6 Nm | |||
| F07 | M12x1.5 | 16 Nm | |||
| 7AZ | Ball pin for gas pressure spring to body | F07 | M10 | 36 Nm | |
| 8AZ | Earth cable to hinge | F12 | M6 | 8 Nm | |