41 61 Engine compartment lid
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 BMW 550i GT xDrive, 2016 BMW 535i GT xDrive, 2016 BMW 535i GT, 2015 BMW 550i GT xDrive, and 2015 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE COMPARTMENT LID
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Engine compartment lid to hinge | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13 | M8 | 20 Nm | |
| 2AZ | Hinge upper section to hinge lower section | F01/F02/F03/F04/F06/F07/F10/F11 | M8 | 18.5 Nm | |
| 3AZ | Hinge lower section to body to 09/2010 | F01/F02/F03/F04/F06/F07/F10/F11 | M8 | 20 Nm | |
| 3AZ | Hinge lower section to body, rear screw connection, from 10/2010 | F01/F02/F03/F04/F06/F07/F10/F11 | M8, Strength class 10.9 | 28 Nm | |
| 3AZ | Hinge to body | F12/F13 | M8, Strength class 10.9 | 28 Nm | |
| 4AZ | Actuator to hinge upper section | F01/F02/F04/F06/F10/F11 | M8 x 45 | 17 Nm | |
| 5AZ | Actuator to holder | F01/F02/F04/F06/F10/F11 | M8 x 24 | 17 Nm | |
| 6AZ | Holder to hinge lower section | F01/F02/F04/F06/F10/F11 | M8 x 14 | 18.5 Nm | |
| 7AZ | Holder, damper to hinge upper section | F01/F02/F04/F06/F10/F11 | M8 x 14 | 18.5 Nm | |
| Engine compartment lid with active pedestrian protection (from 04/11): | |||||
| 8AZ | Actuator to holder | F01/F02/F04/F06/F10/F11/F12/F13/F18/F34 | M6 x 16 | 7.6 Nm | |
| 9AZ | Lever to hinge, left | F01/F02/F04/F06/F10/F11/F12/F13/F18 | M8 | 23 Nm | |
| 10AZ | Lever to hinge, right | F01/F02/F04/F06/F10/F11/F12/F13/F18 | M8 | Important! Left-hand threads. | 23 Nm |