24 11 Transmission housing, transmission oil sump
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION HOUSING, TRANSMISSION OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission oil sump | GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 10 Nm | |
| 2AZ | Oil drain plug | GA6HP19Z/GA6HP26Z/GA6HP32Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8P75H | M16x1.5 M24x1 M18x1 |
Plastic oil sump | 8 Nm |
| 3AZ | Oil filler plug | GA6HP26Z/GA6HP32Z | M30x1.5 | 80 Nm | |
| GA6HP19Z/GA6HP26Z/GA6HP32Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8HP90Z/GA8P75H | M18x1.5 | 35 Nm | |||
| 4AZ | Transmission oil sump | GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8HP90Z/GA8P75H | M6 | Replace aluminum screws; jointing torque and angle of rotation must be observed without fail. | |
| 1. Jointing torque | 4 Nm | ||||
| 2. Angle of rotation | 45 ° | ||||
| Steel screws | 10 Nm | ||||
| 5AZ | Oil drain plug | GA8HP90Z | M10 | 12 Nm | |
| 6AZ | Heat shield on gearbox | GA8HP45Z/GA8P70Z/GA8P75H | M8 | 19 Nm | |
| GA8HP45Z | M6 | 8 Nm | |||
| 7AZ | Ground strap to body and transmission | GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8P75H | M8 | 19 Nm | |