11 21 Crankshaft and Bearings

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATIONS - CRANKSHAFT AND BEARINGS

		Type	Thread	Tightening specification	Measure
1AZ	Torsion damper (hub) to crankshaft (central bolt 12.9)	N55	M18x108	Replace screw Lightly oil screw and thread
				Jointing torque	100 Nm
				Torque angle	270 °