LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3498 (Communication Systems - Repair (ACTIVEHYBRID)) >> Hands-Free, Telematics Control Unit (TCU) >> 84 11 555 Removing and installing/replacing hands-free microphone

84 11 555 Removing and installing/replacing hands-free microphone

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Disconnecting the plug connection for the hands-free microphone or emergency SOS call button results in fault memory entries in the telephone control unit (limitation in the emergency SOS call system).
After fitting, read out fault memory and if necessary delete entries.

Necessary preliminary tasks:

Lever hands-free microphone (1) with a suitable tool out of mounting.

Installation: 

Direction arrow (2) must point in direction of travel.

Fig 1: Removing Hands-Free Microphone From Mounting Using Suitable Tool
G04792894Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Retaining lugs (1) must not be damaged.

Fig 2: Identifying Retaining Lugs
G04792895Courtesy of BMW OF NORTH AMERICA, INC.