66 20 508 Removing and installing (replacing) control unit (Park Distance Control)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks

Remove FLAP IN LUGGAGE COMPARTMENT PANEL on right

Fold insulating mat (1) to one side.

Fig 1: Folding Insulating Mat To One Side

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove control unit (2).

Fig 2: Identifying Plug Connection And Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Carry out PROGRAMMING/ENCODING .