65 50... Removing and installing/replacing trims for rear cabin monitor base at rear

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

IMPORTANT: Trims may only be replaced in pairs so as to avoid differences in color.

Unclamp trim (1) with special tool 00 9 340 on both sides.

Fig 1: Removing Trim With Special Tool 00 9 340

Courtesy of BMW OF NORTH AMERICA, INC.