65 13 110 Removing and installing/replacing speaker (mid-range speaker in D-pillar)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR SPEAKER CARRIER

Release screws (1) and open speaker box (2).

Fig 1: Identifying Speaker Box And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release nuts (2) and remove mid-range speaker (3) from speaker carrier (4).

Fig 2: Identifying Plug Connection, Mid-Range Speaker, Speaker Carrier And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.