65 12 250 Removing and installing/replacing headphones module
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION)
.
NOTE:
Follow INSTRUCTIONS FOR HANDLING OPTICAL FIBRES
.
Necessary preliminary tasks:
- E72 Only: Disconnect BOTH NEGATIVE BATTERY CABLES
- Disconnect battery negative lead
- Remove VIDEO MODULE
Disconnect plug connection (1).
Release nuts (2) and remove headphones module.